Windows Format To Exfat

Diskpart is a command-line disk partitioning tool helping you to format an external solid-state drive to NTFS or exFAT. Press 'Win+ R' to open RUN, and input 'cmd' and press Enter. If you want to format your Internal or External Drive to exFAT File System, then the easiest way to do it is via Disk Management feature on windows. Step 1 In the case of External Hard Drive, connect the Drive to your System using a compatible medium and make sure the Windows recognizes your Drive.

Nov 30, 2020 Free Format Your Drive to NTFS, FAT32 or exFAT If you want to switch a partition's file system to exFAT, you need to format the partition, which is different from FAT and NTFS conversion. Here you can use MiniTool Partition Wizard Free Edition to format your storage device to NTFS, FAT32 or exFAT file system in one step. Dec 21, 2020 Launch the Windows PowerShell application by clicking on it. Step 3: To perform a quick format, type in the following command ' Format-Volume -DriveLetter DRIVE-LETTER -FileSystem exFAT '. Replace 'DRIVE-LETTER' with the drive letter allocated to your flash drive by the PC.

Dec 03, 2020 • Filed to: Windows Computer Solutions • Proven solutions

'exFAT' file system is the latest file system that has been launched and many people are looking to convert from the 'FAT32' to the 'exFAT' file system. This article is for those looking to convert their file systems. Can you download imovie on windows 10.

This article gives a brief detail on the difference between the 'FAT32' and 'exFAT' file systems, different ways to format 'FAT32' to 'exFAT' on Windows which include using file explorer, disk management, command prompt, and AOMEI partition assistant tool. In addition to this, you can also see some bonus tips to be followed while formatting the partitions.

Part 1: 'FAT32' vs. 'exFAT': What's the Difference and Which One Is Better?

'FAT32' (File Allocation Table) is the most popular file system as it is the oldest and is used by almost every Operating system. But, 'exFAT' is the latest file system which is widely used in formatting external and USB drives. Let us understand which one is better by comparing the following

Based on the above table, it is proven that the 'exFAT' file system is far better than the 'FAT32' file system when you have files with large sizes and need effective and efficient formatting.

Part 2: How to Format 'FAT32' to 'exFAT' on Windows?

Way 1. Format 'FAT32' to 'exFAT' in File Explorer

Using File Explorer, you can format the flash drive from 'FAT32' to 'exFAT' easily and effectively following the below steps:

Step 1: Open File Explorer by pressing 'Windows' + 'E' keys.

Step 2: In the explorer look for your USB flash drive and right-click on it.

Step 3: Click on 'Format' and select 'exFAT' from the 'File System' list.

Step 4: Click the 'Start' button in the end.

Way 2: Convert 'FAT32' to 'exFAT' using CMD

You can convert 'FAT32' to 'exFAT' using a CMD prompt if you know the commands to perform the Diskpart. To use this Diskpart tool, you need to follow the below steps:

Step 1: Open Run dialog box and type 'diskpart ' to the run the Diskpart.

Step 2: Type the following command and press enter after every command:

• 'list disk'
• 'select disk n'
• 'list partition'
• 'select partition m'
• 'format fs = 'exFAT'

From above n = no of external drives, m = no of external drive partitions.

Format To Exfat On Pc

Step 3: Once all the above commands are executed, the formatting progress will be completed within a short time.

Way 3: Convert 'FAT32' to 'exFAT' with Windows Disk Management

Windows Disk Management is an effective built-in feature provided by Windows which helps you in managing the hard disk partitions without any difficulties or errors. It might not be an effective solution when compared to other third-party tools but it is enough to convert 'FAT32' to 'exFAT'. For this follow the below steps:

Step 1: Open 'Disk Management' by right-clicking on the Windows start menu.

Step 2: Select the 'FAT32' formatted partition, right-click on it and click on 'Format'.

Step 3: In the format page, change the 'file system' to 'exFAT' from 'FAT32' and click on 'Ok'.

Step 4: Now the formatting process will start and you may lose all your data so make sure that the important data is taken as a backup.

Step 5: Once the formatting is done, you can see that 'FAT32' is converted to 'exFAT' in the disk management interface.

Way 4: Format 'FAT32' to 'exFAT' through a third-party converter

Generally, the above-mentioned methods may or may not work as they may face issues like write-protection, file system corruption, etc. In such cases, third-party tools like the AOMEI partition assistant can give better results in formatting the 'FAT32' to the 'exFAT' file system. Follow the below steps for using the AOMEI partition assistant tool.

An important point to note is to take a backup of all the important files and data because once the formatting has been started, you may lose all your data and it will be difficult to retrieve the data.

Follow the below steps for using the AOMEI partition assistant tool.

Step 1: Launch AOMEI

Download, install, and double click on the AOMEI icon to launch the AOMEI partition assistant tool.

Step 2: Format Partition

In the interface, choose the drive that you wish to format and right-click on it. In the menu displayed, click on 'Format Partition'.

Step 3: Choose 'exFAT'

In the 'Format Partition' interface, select 'exFAT' from the file system menu. 'Partition Label' and 'Cluster Size' can be added as per the need. Click on 'Ok' and 'Apply' to perform the formatting.

Following the above-mentioned steps, you can format your disk partition or drive from 'FAT32' to 'exFAT' easily and effectively.

Part 3: Bonus Tips to Convert 'FAT32' to NTFS on Mac and Linux

1. Convert 'FAT32' to 'exFAT' on Mac

You can easily convert a 'FAT32' file system to 'exFAT' using the 'Disk Utility' option on Mac. Follow the below steps for the following:

Step 1: Go to 'Applications'->' Utilities' and launch 'Disk Utility'.

Step 2: In the Disk Utility interface, select the external drive that you want to format.

Step 3: Under the 'Erase' tab, select the 'exFAT' file type from the menu list.

Step 4: Click on the 'Erase' button to start the formatting from 'FAT32' to 'exFAT'.

2. Format 'FAT32' to 'exFAT' on Linux

To format 'FAT32' to 'exFAT' file system on Linux, follow the below steps:

Step 1: To view all the drives attached to your system, type sudo fdisk -l in the command line.

Step 2: Select the drive that you want to format and type sudo wipefs -a /dev/sdb to start fresh with a new 'exFAT' file system

Step 3: Follow the on-screen instructions and select 'exFAT' from the message 'HPFS/NTFS/exFAT' it displays

Step 4: Press 'w' to sync the disk partitions.

Step 5: Type sudo mkfs.'exFAT' -n hardDisk /dev/sdb1 to format your drive to 'exFAT'

The Bottom Line

As mentioned in the article, different ways can be used to convert or format from the 'FAT32' to the 'exFAT' file system. Follow all the above-mentioned procedures to easily and effectively format your drive.

While formatting your drive using file explorer, command prompt, or disk management, you may find some trouble because of the issues like write-protection, file system corruption, etc. So, it is recommended to use the 'AOMEI Partition Assistant' a third party tool which provides an interactive and easy to use interface to format effectively without any interruptions.

People Also Ask

Format Drive Exfat Windows 10

• When compared to 'FAT32', 'exFAT' is a better file system type in the following aspects:

  • There is no file size limit for 'exFAT', but 'FAT32' can support up to a size of 4GB only.
  • 'exFAT' file system performs faster writing and reading of data when compared to 'FAT32'.

• You can convert 'FAT32' to 'exFAT' on Mac using the Disk utility option that it provides. In the disk utility, follow the below steps:

  • Select the disk partition that you want to format from the list of disks displayed on the left pane of the interface.
  • Under erase tab->File system, select 'exFAT' and click on erase.

  This will format your partition completely with file type as 'exFAT'.

• How do I convert my flash drive from 'exFAT' to 'FAT32'?

  Converting your flash drive from 'exFAT' to 'FAT32' has become very easy now. Descargar bluestacks para pc windows 7. Follow the below steps to format:

  • Double-click on 'This PC' and from the list of drives select the flash drive.
  • Right-click on the flash drive and click 'Format'.
  • In the Format window, select the 'file type' as 'FAT32'.
  • Click on Format.

Partition Recovery

Partition Management

Solve Partition Problems

Partition Tips

While most external hard drives are already designed to work for Windows computers, there are times when you need to reformat one. You might want a drive that works with Macs and PCs, or maybe you want to partition it, which will split it up into two different formats. Adobe pdf gratuit. Here's how to format an external hard drive for Windows 10 or partition it.

How to Format a Hard Drive for Windows 10

Note: Formatting your drive will erase all the existing files on it. So if your external hard drive already has important files on it, make sure to back them up before proceeding.

1. Connect your external hard drive to a Windows computer. If your external hard drive is working, your computer will automatically detect it, and the drive will appear under Devices and Drives next to your internal drives in the This PC window. You can also find it in the left sidebar of File Explorer.

   Note: If you already used your external hard drive on a PC, be sure to back up any files on it. Formatting your drive will wipe out all the data in it.

2. Right-click on the external hard drive and click Format.
3. Choose a format under File System. By default, Windows computers will choose NTFS (New Technology File System) for you because that's the native Microsoft filing system. But if you want the external hard drive to also work on a Mac, you should choose exFAT.

   Note: The exFAT file system only works on Mac 10.6.5 or later, and Windows XP SP3 or later.

4. Check the Quick Format box, and click Start. Depending on the size of the drive, and if there are files to be deleted in it, this can take a few to several minutes to finish.
5. Click OK when the Format Complete pop-up screen appears.

Now you have a hard drive formatted for Windows, but what if you wanted to use it with Mac computers also? One easy way to have a hard drive that works with Mac and Windows is by partitioning it. This means you're splitting the drive into two formats, one for Mac and one for PC. Here's how to do that:

How to Partition an External Drivein Windows 10

1. Open the Windows search box, type 'diskmgmt.msc,' and hit enter. The Windows Search Box is the magnifying button icon in the bottom-left corner of your screen.
2. Right-click on your external hard drive and select Shrink Volume. If this option is not available to you, reformat the drive to NTFS and try again.
3. Enter an amount of space that you want to shrink your volume by. The remaining space will be displayed in megabytes.
4. Then click Shrink. This will split the hard drive, with one part becoming unallocated space.
5. Right-click the unallocated space on your drive and select New Simple Volume.
6. Click Next.
7. Then indicate how big you want the partition to be. If you want to use the rest of the space, enter the maximum disk space indicated above it. Then click Next.
8. Next, choose what drive letter you want to use. Letters that have already been assigned to other drives will not be on this list, so don't worry if there are missing letters. Just choose among the drive letters still available.
9. Go to File System and choose a format. Windows will choose NTFS for you because that's Microsoft's native filing system. But if you want the external hard drive to also work on a Mac, you should choose exFAT, which is an upgraded version of FAT32.

   Note: The exFAT file system only works on Mac 10.6.5 or later, and Windows XP SP3 or later.

10. Check the Quick Format box, and click Next.
11. Finally, click Finish. If a pop-up appears telling you to format the disk, click Format Disk. After that, the newly formatted disk will open automatically.

Partitioning your external hard drive will enable you to perform tasks in one section without affecting the rest of the drive. If you want to know how to format a hard drive for Mac, check out our previous article here.

Related Articles